Basswood Louvre Shutters | Interior Shutters to enhance your home

BASSWOOD SHUTTERS


Basswood Timber has been the mainstay of materials in the manufacture of Plantation Louvre Shutters for the last 10-15 years.

The raw material in basswood timber shutters is kiln dried to a level best suited to our climate, following which numerous layers of primer, paint and top coat are applied. The Basswood Shutter panels are light, they have a solid panel structure and hang true.

Basswood Shutters are ideal for living areas including bedrooms, dining areas, lounge rooms and kitchens. They provide good insulation, exceptional light control and they are strong and durable. However they are not water resistant. For water resistant shutters see our Polymer Shutters

Basswood Shutters are available in a range of standard paint colours. Included in our standard range are 5 wood stains. These are a favourite amongst interior designers looking to add warmth to a room. Without a doubt, Basswood Shutters will be a focal point in any home.

  • 5 Year Residential Warranty on the finish of the product
  • 15 year Workmanship Residential Warranty on the product
  • Blades can close in both 'up' and 'down' directions
  • Available in both hidden strip and front tilt bar operation
  • Approx. 7.7kg per square metre
  • Available in 63mm, 89mm and 114mm blades
  • 14 fashionable standard colours are available
  • Custom paint colours available. Orders for custom colours require a sample – to correctly colour match we recommend a piece of cardboard painted (NOT a paint store sample swatch card)

Hinged Shutters

  • A Wide range of frames available
  • Minimum width 250mm, minimum height 350mm
  • Maximum width 950mm, maximum height 3000mm
  • Maximum double hinged panel (eg LL, RR or LLRR) is 600mm per panel. Height of the panels must be greater than the width of two panels
  • Mid rail required for heights over 1800mm, with a second mid rail for heights over 2400mm

Sliding Shutters

  • Maximum single panel width is 950mm
  • Panels exceeding 950mm can be made using “Combo Panels” – 2 panels hinged together to slide as one
  • Maximum panel height is 3000mm
  • Mid rail required for any panels over 1800mm. Two mid rails for panels over 2400mm
  • Available as 'Sliding Open' or 'Sliding Closed'
  • Supplied with 140mm fascia, which can be cut to suit onsite if the fascia will be fully reveal fitted
  • We always recommend the use of bottom tracks for sliding shutters

Track Bifold Shutters

  • Maximum single panel width is 700mm
  • Maximum panel height is 2400mm
  • We recommend a maximum of 4 panels in a single direction
  • Surface mount tracks, or tracks recessed into bottom frames are required for warranty
  • Mid rail required for any panels over 1800mm. Two mid rails for panels over 2400mm
  • Supplied with a 140mm fascia, which can be cut to suit onsite if the fascia will be fully reveal fitted

REQUEST A FREE QUOTE

From Approved Aspect Retailer